How to Restore a Vintage Console Stereo

There are four phases to this furniture restoration project.

Phase 1: Fix Cosmetic Damage (Steps 1 through 6)

When I found this vintage console stereo, it was in rough shape. The legs had broken through the particleboard bottom. So first I had to attach a new plywood base, fill the chips and nicks, hide water damage and address other cosmetic work.

Phase 2: Rebuild The Front Panel (Steps 7 through 14)

The center panel needed to be covered in place. I chose a four-way bookmatch pattern with sequence-matched leaves of figured sapele veneer.

The speaker cloth was faded, so I replaced it with classic black ($18 per yard, parts-express.com) and designed new slats to lay over the top.

Phase 3: Make New Legs (Steps 15 and 16)

I chose sapele for the new legs because it was a good match for the veneer on the front panel. Sapele looks like mahogany and is similar to work with, but often has a pronounced ribbon figure, which I love. I found pre-milled 6/4 sapele at a local lumberyard.

Phase 4: Final Touches (Steps 17 and 18)

I finished the console and update the audio components for modern functionality and high quality sound.